Lightweight Activated Carbon Dust Mask Anti Odors With Exhalation
Valve
1 . Descriptions
The Dust Mask is light and comfortable. The internal nosepiece is
made of velvet/sponge double-layer. There are no exposed metal
components; the external nosepiece used to adjust the mask on the
face is metal coated. Structure and materials are long lasting and
avoid the collapse in humid environments.
2 . Material of each layer
1st layer : Protective pp spun-bonded non-woven
2nd layer : Active carbon filter(MX-3006)
3rd layde : FFP1 melt blown filter(have filter efficiency level of
80%)
4th layer : Shaped needle punched cotton
3. Advantages
COMFORTABLE&SOFT
4 layers virgin non woven fabric,45g hot air makes mask soft and
puffy ,comfortable to touch skin, carbon layer is anti odors.
3D MODEL L ING
Three- Dimentional,imitate the shape of nose and mouth,perfectly
wrapping people's mouth and nose.
THE VALVE'S WORKING PRINCIPLE
it is close when inhale,so outside particles couldn't flow in.It is
open when exhale to wipe out the air emissions and help breath
easily.
NOSE CLIP&NOSE FOAM
Nose foam prevents leakage and provide twice protection. Nose foam
is made of sponge.It is comfortable to settle nose foam on nose
bridge.
4. Certification
| CE Standard for Disposable Respirators |
| EN: 149:2001 + A1:2009 |
| Distinguish | Filter Efficiency | Penetration | Resistant |
| FFP1 NR | ≧80% | < 20% | < 21mmH2O |
| FFP2 NR | ≧94% | < 5% | < 24mmH2O |
| FFP3 NR | ≧99% | < 1% | < 30mmH2O |
This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on
Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment
procedure based on internal production control plus supervised
product checks at random intervals (Module C2) set out in Annex VII
under surveillance of BSI , notified body n°0086.
5 . FAQ
Q: Can you provide free samples?
A: All samples are provided freely, it will takes3-5 days to
prepare the samples.
Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production
samples. Meanwhile, we have a complete after-sales system.
Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face
mask, OEM production is ok.
