Carbon FFP1 Dolomite Light Cup Respirator, Dolomite Dust Mask , CE Certificate Approved

1 . Descriptions :

2 . Certification

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.EU type examination certificate (module B) issued by BSI , notified body CE0086.
• The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals set out in Annex VII under surveillance of BSI , notified body CE0086.

3 . How to use?

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
• Hold respirator under chin,with nose piece up
• Locate the upper strap across the crown of the head and the lower strap below the ears.
• Strap must not be twisted
• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
• The seal of the respirator on the face should be fit-checked before entering the workplace.
• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

4 . Expiry date and packing

• If maintained as per storage instructions, product can be used up to 5 years from date of manufactory.
• The disposable respirators can be packed in attractive color box with User Manual in.

5. FAQ

Q: Can you provide free samples?

A: All samples are provided freely, it will takes3-5 days to prepare the samples.

Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.

Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.

6 . More pictures

Our company has a core team with more than ten years of packaging design and manufacturing experience, providing Disposable Dust Mask, FFP1 Dust Mask, FFP2 Dust Mask, Carbon Filter Dust Mask, Anti Pollution Dust Mask, Surgical Dust Mask, Disposable Surgical Mask, Pharmacy Surgical Mask, Dust Respirator Mask, Respirator Filters Mask, Foldable N95 Mask, Fine Particle Dust Mask, Dust Mask With Valve and so on.